Car recall results

Recall notices for this model

Search results  (1–3 of 3)      
Recall: No. 1 of 3
Recall Ref: R/2010/170
Exact Model: LEXUS IS220d, IS250, GS300, RX300.
VIN: JTHBH96S#05000014 to JTHBH96S#05029303(GS300), JTHBB262#02000003 to JTHBB262#02000572(IS220d), JTHBK262#02000011 to JTHBK262#02005732(IS250), JTJHF31U#00001020 to JTJHF31U#00034409(RX300), JTHBK262#05000019 to JTHBK262#05007448(IS250), JTJHF31U#02000001 to JTJHF31U#02014509(RX300)
Build Date: 10/02/2003 to 09/12/2005
Numbers: 15408
Defect: If the incorrect brake fluid is used in the brake system, it is possible that the rear seal can become dry and curl in its recess, due to the operation of the piston. This can result in a brake fluid leak, which will, when the fluid reaches a low level, illuminate the brake fluid low warning light on the dash.
Action: Recall all affected vehicles and replace the rear seal with an improved one.
Launch Date: 08 November 2010
Recall: No. 2 of 3
Recall Ref: R/2011/150
Exact Model: Lexus RX300 and Lexus RX400h (MZ Engine)
Build Date: 1 jun 2004 to 31 mar2005
Numbers: 4162
Defect: Due to a none conformance to specification, the front crankshaft pulley inner and outer rubber mounted section may separate. If the separation occurs noise will become apparent, the ignition warning lamp may illuminate and, in the worst case, the power steering drive belt may detach from the pulley which will result in the driver having to significantly increase their effort to steer the vehicle, especially at low speed.
Action: Recall the vehicles that are likely to be affected to check and where necessary replace the crankshaft pulley.
Launch Date: 18 January 2012
Recall: No. 3 of 3
Recall Ref: R/2004/199
Exact Model:
Description: Possibility that the stop lamp could fail
VIN: HF31U000000001005 to HF31U000000028470
Build Date:
Numbers: 5937
Defect: In the stop lamp switch of subject vehicles equipped with LED stop lamps, there is the possibility that silicone oxide may be generated on the surface of the contact point, and in consequence the resistance of the contact could increase. In this circumstance current may not flow, causing the stop lamp to become inoperative.
Action: Recalled vehicles will have the subject switch replaced with a quality assured unit.
Launch Date: 15 December 2004

Manufacturer contact details:
Toyota (GB) Ltd
Great Burgh, Burgh Heath, Epsom, Surrey, KT18 5UX


Is your vehicle affected by a recall?

If you find a recall notice above that matches your vehicle – make/model, date of registration, VIN or engine number – the next step is to confirm whether the required inspection or repair has been carried out.

This information is currently only available from the individual vehicle manufacturers or importers. Contact their customer services department with details or your vehicle and the recall, and ask for confirmation that the necessary work has been completed.

In most cases, the manufacturer or importer contact details will have been returned in the search results above. If not, check your vehicle handbook or contact the Recall Information Point at the SMMT, Consumer Affairs Department, Forbes House, Halkin Street, LONDON SW1X 7DS (tel: 0870 7518270).


The information provided on vehicle recalls is for information purposes only. While the AA has taken care in the preparation of recall information, and the information presented is believed to be reliable, the AA does not represent that such information is accurate, comprehensive, verified or complete, and shall not assume or accept any liability (whether in negligence or otherwise) for the accuracy or completeness of such information or for any reliance placed by any person on the information. Nor shall the AA be under any obligation to advise any person of any error in information provided. The AA shall not be liable for any damages (including, without limitation, damages for loss of profits, business or other consequential loss) which may arise from any use of, or reliance upon, or inability to access, the information.

To confirm that there are no recalls on your vehicle, please contact the manufacturer or importer of the vehicle for final confirmation.