Car recall results

Recall notices for this model

Search results  (1–3 of 7)     button next
Recall: No. 1 of 7
Recall Ref: R/2014/058
Exact Model: 208
VIN: VF3******ET046636 to VF3******EW025550
Build Date: 01/03/2014
Numbers: 125
Defect: Affected vehicles may have struts with a non compliant internal component. This may prevent the struts from maintaining the tailgate in the open position.
Action: Non compliant struts are determined by using manufacturer test methods. If replacement is required both struts must be replaced.
Launch Date: 15 May 2014
Recall: No. 2 of 7
Recall Ref: R/2012/158
Exact Model: 208
VIN: VF3******CW090606 to VF3******CW095589
Build Date: 19 July 2012 to 20 July 2012
Numbers: 14
Defect: Some vehicles from the affected production batch may have an issue with the effectiveness of the ESP system caused by non-conformity with the ABS/ESP hydraulic block. Consequences: This non-conformity will not affect the operation of the ABS system or the efficiency of the brakes. It may affect the operation of the ESP system on the rare occasions that it is activated; the correction of the drive delivered to the road wheel(s) when the ESP is activated may not be accurate to how it is manufactured to respond.
Action: The hydraulic ABS/ESP block is to be replaced.
Launch Date: 17 December 2012
Recall: No. 3 of 7
Recall Ref: R/2012/080
Exact Model: 208
VIN: VF3CC8HROCW022429 to VF3CC8HROCW022429
Build Date: 02 March 2012
Numbers: 1
Defect: On a very small batch of vehicles, the bonnet catch may not have been correctly installed. This could result in the bonnet not being properly secured, following it being opened and then not correctly closed.
Action: Recall the affected vehicle, to check and if required, replace the bonnet catch.
Launch Date: 16 July 2012

Manufacturer contact details:
Peugeot Motor Company PLC
Pinley House, 2 Sunbeam Way, Coventry, West Midlands, CV3 1ND


Is your vehicle affected by a recall?

If you find a recall notice above that matches your vehicle – make/model, date of registration, VIN or engine number – the next step is to confirm whether the required inspection or repair has been carried out.

This information is currently only available from the individual vehicle manufacturers or importers. Contact their customer services department with details or your vehicle and the recall, and ask for confirmation that the necessary work has been completed.

In most cases, the manufacturer or importer contact details will have been returned in the search results above. If not, check your vehicle handbook or contact the Recall Information Point at the SMMT, Consumer Affairs Department, Forbes House, Halkin Street, LONDON SW1X 7DS (tel: 0870 7518270).


The information provided on vehicle recalls is for information purposes only. While the AA has taken care in the preparation of recall information, and the information presented is believed to be reliable, the AA does not represent that such information is accurate, comprehensive, verified or complete, and shall not assume or accept any liability (whether in negligence or otherwise) for the accuracy or completeness of such information or for any reliance placed by any person on the information. Nor shall the AA be under any obligation to advise any person of any error in information provided. The AA shall not be liable for any damages (including, without limitation, damages for loss of profits, business or other consequential loss) which may arise from any use of, or reliance upon, or inability to access, the information.

To confirm that there are no recalls on your vehicle, please contact the manufacturer or importer of the vehicle for final confirmation.