Car recall results

Recall notices for this model

Search results  (4–6 of 7) button back   button next
Recall: No. 4 of 7
Recall Ref: R/2012/100
Exact Model: 208
Description: BRAKES MAY FAIL
VIN: VF3******CW083270 to VF3******CW083818
Build Date:
Numbers: 2
Defect: During production, it is possible the brake system may not have been bled correctly and some air may remain in the brake system. This could result in increased brake pedal travel and a possible reduction in braking efficiency.
Action: Affected vehicles will be recalled to have the brake system bled
Launch Date: 12 September 2012
Recall: No. 5 of 7
Recall Ref: R/2014/046
Exact Model: 208 2008
VIN: VF3******DY051950 to VF3******DY080248
Build Date: September 2013 to November 2014
Numbers: 5490
Defect: The front suspension wishbone mounting bolts might not have been manufactured to the correct specification potentially causing a risk of these parts breaking. Broken mounting bolts can be noticed by the driver through noises and poor directional control.
Action: Recall the vehicles that are likely to be affected to replace the front suspension wishbone mounting bolts.
Launch Date: 22 April 2014
Recall: No. 6 of 7
Recall Ref: R/2014/026
Exact Model: 208 2008 308 308 (T9) and Partner III
VIN: VF7******EJ529803 to VF7******EY005909
Build Date: Jan-14
Numbers: 149
Defect: It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.
Action: Recall all the affected vehicles and retorque the high pressure fuel rail pipes.
Launch Date: 27 February 2014

Manufacturer contact details:
Peugeot Motor Company PLC
Pinley House, 2 Sunbeam Way, Coventry, West Midlands, CV3 1ND


Is your vehicle affected by a recall?

If you find a recall notice above that matches your vehicle – make/model, date of registration, VIN or engine number – the next step is to confirm whether the required inspection or repair has been carried out.

This information is currently only available from the individual vehicle manufacturers or importers. Contact their customer services department with details or your vehicle and the recall, and ask for confirmation that the necessary work has been completed.

In most cases, the manufacturer or importer contact details will have been returned in the search results above. If not, check your vehicle handbook or contact the Recall Information Point at the SMMT, Consumer Affairs Department, Forbes House, Halkin Street, LONDON SW1X 7DS (tel: 0870 7518270).


The information provided on vehicle recalls is for information purposes only. While the AA has taken care in the preparation of recall information, and the information presented is believed to be reliable, the AA does not represent that such information is accurate, comprehensive, verified or complete, and shall not assume or accept any liability (whether in negligence or otherwise) for the accuracy or completeness of such information or for any reliance placed by any person on the information. Nor shall the AA be under any obligation to advise any person of any error in information provided. The AA shall not be liable for any damages (including, without limitation, damages for loss of profits, business or other consequential loss) which may arise from any use of, or reliance upon, or inability to access, the information.

To confirm that there are no recalls on your vehicle, please contact the manufacturer or importer of the vehicle for final confirmation.